Clear voice + voice boost: In marine environments there are many sources of noise that can affect the quality of your communications, such as engine noise, breaking surf and more. The IC-M36 automatically adjusts the outgoing voice and the incoming audio to compensate for the ambient noise level: whether you're in a loud environment or in a quiet area, the IC-M36 ensures your radio conversation is sent and received as clearly as possible.
And yes, it floats
Continuing the legacy of the IC-M34, the IC-M36 floats back up to the surface if dropped overboard, even if the optional speaker microphone, HM-165, is attached.
Noise cancelling microphoneThe sub-microphone on the rear panel inverts phase and cancels out ambient noise from the main microphone.
Automatic volume adjustmentWhen in an engine room or high noise environment, the sub-microphone detects the ambient noise and the IC-M36 automatically increases the volume output to suit the surrounding environment.
Low power consumptionAlthough the IC-M36 delivers a high 6W RF output and 700mW audio output, its current saving circuit offers a practical 8 hours of operating time with the supplied 980mAh Lithium-Ion battery pack.
Other features- Waterproof construction equivalent to IPX7 (1m depth for 30 minutes)
- Dual/Tri-watch functions
- 4-step battery life indicator
- Weather channel with weather alert
- 2-step power saver
- Auto scan function
- Instant access to Ch 16 or Ch 9
| General |
|---|
FrFrequency Range Tx RxCurrent drain (at 7.4V DC) Tx (at 6W output) Rx (at AF max.)r> Internal speaker External speaker Power save | 156.025?157.425MHz 156.050?163.275MHz 1.5A typical
300mA typ. 200mA typ. 10mA typ. |
Usable channelsINT, USA, CAN, WX channels
Type of emission16K0G3E (FM)
Operating temperature range-20?C to +60?C; -4?F to +140?F
| Antenna Impedance 50Ω (STUD) |
Dimensions (W?H?D)
(Projections not included)62 ? 139.5 ? 43 mm;
2 7⁄16 ? 5 1⁄2 (H) ? 1 11⁄16 in
Weight (approx.)| 295g; 10.4oz (With BP-252, FA-SC58V and MB-109) |
| Transmitter |
|---|
Output power (Hi/Low)| 6W (High),1W (Low) 2W (High, with alkaline cells) |
Max. frequency deviation? 5kHz
Frequency error?10ppm
| Audio harmonic distortion | Less than 10% (at 60% dev.) |
| Spurious emissions | ?68dBc |
Adjacent channel power70dB
Audio harmonic distortion10% (at 60% dev.)
Residual modulation40dB
| Receiver |
|---|
| Sensitivity (at 12dB SINAD) | 0.25?V typical |
Squelch sensitivity | 0.35?V typ. (at threshold) |
Adjacent Channel Selectivity70dB typical
| Spurious response | 70dB typical |
| Intermodulation Rejection | 70dB typical |
Hum and noise ratio40dB typical
Audio output power (at 10% distortion) Internal speaker External speaker | 700mW typ. (16Ω load) 350mW typ. (8Ω load) |